a ü Exit Accumulator 1 T1 Bridle 1: Speed controlled drive.
Decides speed of entry section.
Bridle 2: Current controlled drive.
Decides strip tension in furnace section.
Load cell mounted after bridle 2 gives feedback of actual tension of the strip.
Based on feedback tension of bridle 2 is controlled to achieve the set tension.
Bridle 3, 4, 5: Current controlled drives.
Provides entry tension for tension leveller.
Bridle 6: Speed controlled drive.
Decides speed of process section.
Bridle 7: Current controlled drive.
Adds exit tension to tension leveller. News 11 Another buffer for material.
Similar to entry accumulator.
Typically it is filled to 11-15%.
When exit stops, it accumulates the material.
Read more about Bridle 3, 4, 5: Current controlled drives: