Irons : A bench grinder is an indispensable tool for maintaining an….

posted in: Uncategorized | 0

Bridle Bijoux - Silver & crystal clover Horses-store.comIrons : A bench grinder is an indispensable tool for maintaining an….

Each piece is identical and has both a tenon and slot on each end. 13 jigs & fixtures bench grinder Tool Rests’ .Add some precision to your sharpening tasks by upgrading your tool rest. A bench grinder is an indispensable tool for maintaining an edge on chisels, turning tools, and plane irons.

For many woodworkers, it’s the first step in the tool sharpening process.

But most bench grinders come with inadequate t~ol rests that make it difficult or impossible to get consistent results.

Fortunately, there are a few after-market tool rests that can improve your ability to grind tools accurately and safely.

I recently tried out a couple of these.

REQUIREMENTS.

Before looking at each of the different models, it’s worth taking a minute to focus on what’s important in a tool rest.

First, it needs to provide a stable platform.

That is, it should be able to hold the tool firmly at a predetermined angle without excessive vibration.

And this is where most of the stock rests fall short.

They’re oft e n undersized , The Veritas Grinding Set makes grinding accurate bevels on chisels and plane irons a simple task. ..

The Veritas sharpening jig holds the tool securely.

It slides back and forth in the machined groove to provide a consistent, square edge.

And made of thin steel, held in position with a wing nut.

The second important feature to look for in a tool rest is easy adjustability.

You need to be able to set the correct grinding angle for a variety of different tools.

And once the angle is established, the rest needs a reliable, solid mechanism to lock in that angle.

Finally, since your grinding tasks might include everything from a large turning gouge to a small spokeshave blade, having a versatile tool holder to make the task easier and safer is a big plus.

Woodsmith THE VERITAS GRINDING SET The first tool rest I looked at was the Veritas Basic Grinding Set.

As the name implies, this is more than just a tool rest.

It’s a complete sharpening system with a grinding jig and an angle-setting gauge.

SETTING UP.

At the heart of the sys: tern is the anodized aluminum tool rest that mounts to a board along with your grinder.

The rest features a large platform that includes a slot for the grinding jig.

The main photo above shows the tool rest and jig in action.

Position adjustments are made easy with the two No. 181 14 spring-loaded handles that allow you to move the platform to just about any grinding angle: THE ANGLE-SEnING GAUGE.

Zeroing in on a specific angle can be a hassle in any sharpening setup, but the plastic gauge included with the Veritas set makes it a breeze.

The gauge includes the most commonly used bevel angles of 20°,25°, 30°, and 35°.

While holding the gauge against the wheel, you simply lock the platform to the matching angle, as shown in the photo below.

THE GRINDING JIG.

With the tool rest locked in place, the next step is to mount your tool in the grinding jig.

A pair of thumbscrews tightens down a clamping bar, securely holding the tool in place.

A brass pin registers the blade at 90° for most common tasks.

The main photo and inset on the opposite page show this pin.

To sharpen skew chisels, simply move the pin to change the angle to 30°.

Overall, the Veritas jig provides a solid and easy-to-use grinding system for a very reasonable price ($69).

For sources on where you can purchase the Veritas system, take a look at page 51. WOLVERINE tube arms slide in well-machined channels on the base and lock in place with oversized handles.

For ease of use and holding power, these locks just can’t be beat.

And the all-steel construction ensures a lifetime of reliable service.

A STABLE PLATFORM.

The Wolverine’s tool rest takes full advantage of the steel construction by providing a rock-solid surface.

This platform is for grinding chisels and other flat beveled tools.

It’s great for free-hand grinding, but jigs are available to hold chisels and plane irons as well.

Or you could easily build a couple of shop-made jigs for your other tools.

A .

DIFFERENT APPROACH.

But the Wolverine really shines at sharpening turning tools.

For example, rather than trying to set a platform to the proper grinding angle for a roughing gouge, the Wolverine handles the task with a pocket on the sliding arm to hold the end of the tool.

By sliding the arm toward or away from the wheel, you can set the grinding angle to match the gouge’s bevel.

Once in place, you just rotate the gouge against the wheel to sharpen it across the full face of the cutting edge.

This is a great method for grinding and maintaining consistent bevels.

And since turning tools need very frequent touch-up sharpening, this design is a winner.

BOTTOM LINE.

All in all, you can’t go wrong with either of these wellmade systems.

Which one is right for you depends on the kind of woodworking you do.

Ill • Wolverine’s adjustable arm allows you to grind a perfect bevel on round gouges. The second tool rest I tried was the Wolverine from Oneway.

Since Oneway makes some of the finest lathes on the market, it’s no surprise that this tool rest is geared toward sharpening turning tools.

CONSTRUCTION.

The photo above shows how the Wolverine works.

A base mounted beneath each grinding wheel supports a %”-square steel tube arm.

The adjustable arms hold a tool rest on one wheel and • Setting the angle on the Veritas tool a unique design for rest’ is a breeze.

Just align the correct sharpening longer tools on the other.

The square face of the angle gauge to the wheel. Replacement Grinding Wheels To get the most out of your bench grinder as a tool sharpening system, you’ll probably want to replace the wheel.

Most grinders are sold with a gray, all-purpose wheel that’s not well-suited for grinding tool steel.

The white, aluminum-oxide whee1 in the photo at right will help you get better results.

This wheel has a softer bonding agent holding the abrasive particles.

The soft bond allows the abrasives to break away as they lose their cutting edge.

This exposes fresh abrasives and prevents the wheel from loading up with metal filings, keeping it running cooler and making it less likely to burn your tools.

See Sources on page 51 to find out where to buy these replacement wheels.

Www.Woodsmith.com Woodsmith 15 Weekend Project classic Mantel Clock This is a chance to give your skills a workout and use a few of those leftover pieces of wood you’ve been hanging on to.

Read more about Irons : A bench grinder is an indispensable tool for maintaining an….:

Equestrian Products – Guardian Horse Bedding, Equiderma Skin Products, Equilinn Sports Bra

Other Sources:

  • Beval Saddlery Ltd
  • ARHPA | American Road Horse & Pony Association
  • Horses for Sale | HorseClicks
  • Equestrian Products – Guardian Horse Bedding, Equiderma Skin Products, Equilinn Sports Bra, Learn more about Bridle Bijoux – Silver & crystal clover Horses-store.com HERE:

    Horses-Store.com and Irons : A bench grinder is an indispensable tool for maintaining an….
    Horses-Store.com - Irons : A bench grinder is an indispensable tool for maintaining an….
    Horses-Store.com and Irons : A bench grinder is an indispensable tool for maintaining an….
    Horses-Store.com - Irons : A bench grinder is an indispensable tool for maintaining an….