Quick Find Saddle Index Bulloo

posted in: Uncategorized | 0

Yellow Cream - For the Horse Horses-store.com Quick Find Saddle Index Bulloo

AUSTRALIAN MADE STOCK SADDLES THAT HAVE WITHSTOOD THE TEST OF TIME WARNING……please read below before purchasing your saddle It has been brought to our attention that there are some Saddles being sold in Australia and overseas under the label of Toowoomba Saddles.

We would like to advise you that these Saddles “are not” Toowoomba Saddlery Saddles.

All genuine Toowoomba Saddlery saddles are manufactured in Australia by Toowoomba Saddlery.

They will be stamped “Made in Australia” Toowoomba Saddlery along with a name plate attached to the saddle……Not Toowoomba Saddles Over the years we have seen many copies of our saddles (some being manufactured in third world countries from inferior products) being offered for sale both here in Australia and overseas.

These copies can be stamped “ Australian Designed”, “Designed in Australia” or just “Australia” While there is nothing illegal about this practice it is just really “buyer beware”.

Remember: Toowoomba Saddlery is the ‘Innovator‘ not the Imitator.company’s will always be trying to copy the quality of the Toowoomba Saddlery range, but to ensure that you are getting the genuine article before parting with your money be sure that it is stamped and plated Toowoomba Saddlery.

Should you have any questions prior to your purchase please contact us and we will do our best to assist you. How to measure your stock saddle between pommel and facing) to inside back seat.

B) Measure dip in seat by placing ruler or straight edge on Pommel and top of cantle.

Take measurement from this ruler to lowest point of seat.

C ) To measure all types of poley knee pads place ruler in front of knee pad, take measurement from flap to highest point of knee pad.

D) To measure thigh pad take measurement from flap to highest point of thigh pad at the back.

E) To measure length of flap, take length from stirrup leather bar to bottom of flap. Quick Find Saddle Index Bulloo……………………………………………76 Cloncurry Fender……………………………79 Dubbo Fender………………………………..74 Mareeba………………………………………..75 Paroo…………………………………………….77 Sunset Drafter………………………………..78 Toowoomba Stock Fender……………….80 A) Measure length of seat from stitching on fore part (being the raised portion 72 Listed below are just a few of the advantages of owning a Toowoomba Saddlery Saddle Close contact, double reinforced composite mesh tree Crafted from genuine Hermann Oak (Tanned in the USA) leathers Stainless steel hardware Stainless steel rigging Fenders swing from stainless steel stirrup hangars.

Fenders will detach to meet some of the enforced safety regulations Genuine T.S.

Stainless Steel, leather covered blevins Leather covered wide Brady aluminium Ox-Bows All Toowoomba Saddlery saddles are an investment and will give years of service when cared for correctly — A quality made close contact Australian Made saddle.

Made by Toowoomba Saddlery Australia, this saddle will suit many riding applications.

Crafted from 1st grade, premium saddle flap leather with a complete seamed in seat on our #3 double reinforced composite mesh covered tree, edge sewn jockeys and fenders with webbing reinforcing are standard.

The #3 Tree is close contact and lightweight an is standard with semi quarter horse bars.

The tree is hand web strained (the traditional way) and fitted with stainless steel stirrup bars that will allow maximum movement of the fender.

The swinging fenders are also able to be detached from the saddle to meet with some of the enforced safety requirements now placed on riders.

Standard with Stainless steel 3 way rigging plates which offer many different rigging positions to ensure a close & even fitting to your horse.

Leather covered Brady Ox-Bows and stainless steel hardware are also standard. SAD2262………. 15” sad2263………. 16” SAD2264………. 17” Chamber widths: 6” Medium (Semi quarter horse) Lining: Felt Seat Sizes: 15”, 16” or 17” Kneepad Size: 33/4” Seat Dip: 41/2” Flank Girth Rings: Flank slot is standard The mareeba 75 The bulloo This saddle has been developed to the same style as the ever popular Barcoo Poley.

Only we have designed and built this saddle on our #3 close contact wood composite mesh covered tree with double reinforced gullet and kneepads with a web strained seat and stainless steel stirrup bars.

This #3 saddle tree has been very popular in our range of swinging fender saddles for many years so we decided to develop a full flap Barcoo style saddle on this tree.

The Bulloo is crafted using Hermann Oak first grade saddle flap leather.

The Bulloo has the Suprema bates rigging, solid brass hardware, flank girth ring and surcingle slot all as standard.

This saddle is ideal for stock work, competition or general riding. SAD1811ff…… 15” sad1812ff…… 16” SAD1813ff…… 17” Chamber widths: Medium (Semi quarter horse) Lining: Felt Seat Sizes: 15”, 16” or 17” Kneepad Size: 33/4” Seat Dip: 41/2” Flank Girth Rings: Standard The bulloo 76 The paroo This saddle has been developed on our popular #3 close contact wood composite mesh covered tree with double reinforced gullet and kneepads, with a web strained seat and stainless steel stirrup bars.

This #3 saddle tree has been very popular in our range of swinging fender saddles for many years so we decided to develop a full flap style saddle on this tree.

The Paroo is crafted using Hermann Oak first grade saddle skirting leather and all stitching is lock stitched.

The Paroo is available with either double 11/4” girth points or Suprema bates dee rigging, stainless steel hardware, flank girth slot and surcingle slot all as standard.

This saddle is ideal for stock work, competition or general riding. SAD2560FF…… 15” sad2561ff…… 16” SAD2562ff…… 17” Chamber widths: Medium (Semi quarter horse) Lining: Felt Seat Sizes: 15”, 16” or 17” Kneepad Size: 33/4” Seat Dip: 41/2” Flank Girth Rings: Flank girth slot as standard Suprema Dee Bates Rigging: Optional at no extra cost The paroo 77 The sunset drafter For Competition, Stock work or general riding this is an economical close contact half-breed saddle that will fit the bill.

A quality Australian Made saddle crafted from selected Hermann Oak saddle skirting leather.

This saddle is crafted on the #3 wood composite mesh covered tree, double reinforced gullet and kneepads with a web strained seat.

Fitted with stainless steel stirrup bars which gives a free swinging movement of the swinging fenders.

The swinging fenders are also able to be detached from the saddle to meet with some of the enforced safety requirements now placed on riders.

Stainless steel 3 way rigging plates which offer many different rigging positions to ensure a close & even fitting to your horse.

Polished engraved Brady Ox-Bows are standard. SAD3170………. 15” sad3171………. 16” SAD3172………. 17” Chamber widths: Medium (Semi quarter horse) Lining: Felt Seat Sizes: 15”, 16” or 17” Kneepad Size: 33/4” Seat Dip: 41/2” Flank Girth Rings: Flank slot is standard Toowoomba sunset drafter 78 The cloncurry A great choice for stock work, competition or general riding.

This saddle is crafted from selected Hermann Oak saddle skirting leather.

The double reinforced #2 composite mesh resin covered tree is fitted with stainless steel stirrup bars which gives a free swinging movement of the swinging fenders.

The swinging fenders are also able to be detached from the saddle to meet with some of the enforced safety requirements now placed on riders.

This saddle is made with a one piece leather covered head and kneepads. 3 way stainless steel rig plates are used which will give you many rigging options which will ensure a close & even contact on your horses back.

Stainless steel dee’s and aluminium ox bows are standard. sad1860………. 15” sad1861………. 16” sad1862………. 17” Chamber widths: Medium (Semi quarter horse) Lining: Felt Seat Sizes: 15”, 16” or 17” Kneepad Size: 33/4” Seat Dip: 43/4” Flank Girth Rings: Flank slot is standard The cloncurry 79 The stock fender Australian Made using selected Hermann Oak saddle skirting leather.

The #2 double reinforced composite mesh covered tree is web strained and fitted with stainless steel stirrup bars from which the swinging fenders will have full movement and are able to be detached from the saddle to meet with some of the enforced safety requirements now placed on riders.

Stainless Steel “C type” Rigging and Aluminium Ox-Bows are Standard.

If you require a tough, genuine Australian Made all round saddle at an economical price this is the one for you. SAD3030………. 15” sad3031………. 16” SAD3032………. 17” Chamber widths: Medium (Semi quarter horse) Lining: Felt Seat Sizes: 15”, 16” or 17” Kneepad Size: 33/4” Seat Dip: 43/4” Flank Girth Rings: Flank slot is standard The stock fender 80

Read more about Quick Find Saddle Index Bulloo:

Equestrian Products – Guardian Horse Bedding, Equiderma Skin Products, Equilinn Sports Bra

Other Sources:

  • Texas A&M University Horse Sale « Department of Animal Science
  • Hunter Ponies, Pony Jumpers, Green Ponies, Pony Hunters For Sale
  • Dressage.com, Unlimited Dressage, Classical to Competitive
  • Equestrian Products – Guardian Horse Bedding, Equiderma Skin Products, Equilinn Sports Bra, Learn more about Yellow Cream – For the Horse Horses-store.com HERE:

    Horses-Store.com and   Quick Find Saddle Index  Bulloo
    Horses-Store.com - Quick Find Saddle Index Bulloo
    Horses-Store.com and   Quick Find Saddle Index  Bulloo
    Horses-Store.com - Quick Find Saddle Index Bulloo